How to repair your airpods pro?

1. Put your AirPods in their charging case, and close the lid.
2. Wait 30 seconds.
3. Open the lid of your charging case.
4. On your iPhone, iPad, or iPod touch, go to Settings > Bluetooth and tap the “i” icon next to your AirPods.
5. Tap Forget This Device, and tap again to confirm.

Best answer for this question, how do I fix my AirPods Pro not working?

1. Make sure that your charging case is fully charged.
2. Place both AirPods in your charging case and let them charge for 30 seconds.
3. Open the charging case near your iPhone or iPad.
4. Check the charge status on your iPhone or iPad to make sure that each AirPod is charging .

Amazingly, why is one of my AirPods pros not working? Check the microphone and speaker mesh on each AirPod. If you see any debris, clean your AirPods using the guidelines in this article, and see if that fixes the issue. Go to Settings > Accessibility > Audio/Visual > Balance, and make sure that the balance is set in the middle.

Subsequently, how do I factory reset my AirPod pros?

1. Press and hold the setup button for at least 15 seconds.
2. Hold the button until the status light starts flashing amber a few times and then flashes white.
3. You AirPods have now been fully reset. You will need to re-pair your AirPods to your devices in order to use them again.

In this regard, what if I lost 1 AirPod? If you lose an AirPod or your Charging Case, we can replace your lost item for a fee. If we need to replace your AirPods or Charging Case, your replacement will be new or equivalent to new in performance and reliability.Based on user reports, we know that first and second-generation AirPods lasted for about two years of daily use until the batteries had degraded to less than an hour of listening time. Of course, this all depends on how exactly you use your AirPods.

Why are my AirPod pros not lighting up?

If you see no light: Your AirPods and their case are dead and need to be charged. … If you see a green light while your AirPods are connected to a charger: Your AirPods are fully charged. If you see a white flashing light: Your AirPods have been reset and are ready to connect to your iPhone, iPad, Mac, or other device.

Why are my AirPods so muffled?

The most common cause of muffled sound in your AirPods comes from dirty speakers. Since they sit directly inside your ear canal, earwax and other material can build up over time, reducing the quality of the sound. Other reasons could include Bluetooth interference or the fact that your AirPods need to be reset.

How do I activate my AirPods pro?

1. Go to the Home screen.
2. With your AirPods in the charging case, open the charging case, and hold it next to your iPhone.
3. Tap Connect.
4. If you have AirPods Pro, read the next three screens.

Why can I only hear out of one earbud?

Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds. … The voice levels must be equal on both sides of your headset.

Why is my AirPod pro only playing in one ear?

The first thing you should check is if your AirPods are charged properly. One of them might be low on battery which might cause it to shut off. … Simply place the AirPods in their case and charge them with the Lightning cable. Once they are charged, try playing something with them and see if that fixed the issue.

Why is only one of my earbuds working?

On your device, go to Settings and looks for Sound or Audio settings. There you will see an option for Mono Sound or Mono Audio. Make sure you disable it and then recheck the audio on your headphones. In some devices, the option for Mono Audio could be under Ease of Access options.

Can I use stolen AirPods?

You might think a thief can’t use your AirPods if you still have the charging case. That makes sense since the thief needs to return your AirPods to the case in order to pair them to a new iPhone. … So, if a thief stole your AirPods, they can still connect them to another iPhone using a different AirPod charging case.

How do I reset my AirPods to sell?

1. Put your AirPods in their charging case, and close the lid.
2. Wait 30 seconds.
3. Open the lid of your charging case.
4. On your iPhone, iPad, or iPod touch, go to Settings > Bluetooth and tap the “i” icon next to your AirPods.
5. Tap Forget This Device, and tap again to confirm.

How do I force update my AirPods Pro?

New firmware is installed over the air while your AirPods‌ or AirPods Pro are connected to an iOS device. Simply put them in their case, connect them to a power source, and then pair them to an iPhone or an iPad to force the update. That’s it.

Can you track one lost AirPod?

The maps on the Find My app and iCloud website will show a location for one AirPods earbud at a time. If you only need to locate one earbud but not the other, locate the AirPod you have on the map and then place it inside the case. Refresh the map, and it will now share information on the missing earbud.

How do I find my dead AirPod?

1. Open your Find My app.
2. Make sure you’re on the Devices tab.
3. Click on the device to see its last known location on a map.
4. You’ll get an option to play the sound from the left, right, or both AirPods.