First, power down your Mac, turn it on, then immediately press the following keys at the same time: Option, Command, P, and R. You can release the keys after you hear the startup chime. Apple says you might need to readjust settings for volume, screen resolution, startup disk selection, and time zone afterward.
Likewise, how do I completely reset my BIOS?
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings.
- Confirm the changes by highlighting OK, then press Enter.
- To save the changes and exit the BIOS Setup utility, press the F10 key.
Correspondingly, how do you clear the CMOS on a Mac?
- Shut down the computer.
- On the left side of the keyboard, press and hold the Shift, Control, and Option keys while simultaneously holding the power button.
- After 10 seconds, release all of the keys.
- Turn on your MacBook.
Furthermore, how do I reset my BIOS without resetting it? Easy way to do this, which will work regardless of what motherboard you have, flip the switch on your power supply to off(0) and remove the silver button battery on the motherboard for 30 seconds, put it back in, turn the power supply back on, and boot up, it should reset you to factory defaults.
Moreover, where is the BIOS reset button? If you have a newer and fairly high-end motherboard, they often have a dedicated “Clear CMOS” button on either the rear I/O near the USB ports or on the motherboard itself, usually along the edges of the board. To use it, power the system on and then press the reset button.
- Open an elevated command prompt.
- From the command prompt window, type “systemreset –factoryreset ” (without quotes).
- Then, select “Keep My Files” or “Remove Everything” to reset your PC, depending on if you want to keep your personal files.
Contents
How do I restore PC to factory settings?
Navigate to Settings > Update & Security > Recovery. You should see a title that says “Reset this PC.” Click Get Started. You can either select Keep My Files or Remove Everything. The former resets your options to default and removes uninstalled apps, like browsers, but keeps your data intact.
How do you hard reset a Mac?
To do so, shut down your Mac, then turn it on and immediately press and hold four keys together: Option, Command, P, and R. You can release the keys after 20 seconds or so. That’s it!
How do I reset my Mac desktop to factory settings?
To reset your Mac, first restart your computer. Then press and hold Command + R until you see the Apple logo. Next, go to Disk Utility > View > View all devices, and choose the top drive. Next, click Erase, fill out the required details, and hit Erase again.
How do I know if SMC is reset?
What does resetting CMOS do?
Your computer stores low-level settings like the system time and hardware settings in its CMOS. … Clearing the CMOS resets your BIOS settings back to their factory default state. In most cases, you can clear the CMOS from within the BIOS menu. In some cases, you may have to open your computer’s case.
Can you clear CMOS without Jumper?
If there is no CLR_CMOS jumpers or [CMOS_SW] button on the motherboard, please follow the steps to clear CMOS: Take out the battery gently and put it aside for about 10 minutes or longer. (Or you can use a metal object to connect the two pins in the battery holder to make them short-circuited.)
Will resetting CMOS reset BIOS version?
Clearing the CMOS on your motherboard will reset your BIOS settings to their factory defaults, the settings that the motherboard maker decided were the ones that most people would use. … After clearing the CMOS you may need to access the BIOS setup utility and reconfigure some of your hardware settings.
How do you clear the CMOS?
- Turn off all peripheral devices connected to the computer.
- Disconnect the power cord from the AC power source.
- Remove the computer cover.
- Find the battery on the board.
- Remove the battery:
- Wait 1–5 minutes, then reconnect the battery.
- Put the computer cover back on.
How do I Reset my computer when it wont let me?
You can also perform a PC reset by restarting your computer from the sign in screen. This can be done by pressing the Windows logo key+L, then holding Shift key down as you select Power >Restart on the lower right end of your screen. Once your PC restarts, then you can select Troubleshoot > Reset this PC.
- Shut your computer down.
- Power your computer back up, and immediately press the key that enters the BIOS setup screen.
- Use the arrow keys to navigate through the BIOS menu to find the option to reset the computer to its default, fall-back or factory settings.
- Restart your computer.
Why can’t I Reset my PC to factory settings?
One of the most common causes for the reset error is corrupted system files. If key files in your Windows 10 system are damaged or deleted, they can prevent the operation from resetting your PC. Running the System File Checker (SFC scan) will allow you to repair these files and attempt to reset them again.
